Robe ROBIN SilverScan, User Mnaual

Page: 26 / 44

26
R. Gobo Index 1 - a fine movement of rotating gobo 1
R. Gobo Index 2 - a fine movement of rotating gobo 2
R. Gobo Index 3 - a fine movement of rotating gobo 3
R. Gobo Index 4 - a fine movement of rotating gobo 4
R. Gobo Index 5 - a fine movement of rotating gobo 5
R. Gobo Index 6 - a fine movement of rotating gobo 6
R. Gobo Index 7 - a fine movement of rotating gobo 7
Prism - a prism movement
Prism Rot - a prism rotation
Zoom - a zoom module
Frost 1/1 - a frost position 1
Frost 1/2 - a frost position 2
Focus - a focus module
Iris - an iris module
By using these items you can calibrate and adjust effects to their right positions.
Calibration via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find desired effect and touch it to enter the fine effect adjustment
screen.
3. Set desired value and save it by touching the [confirm].
4. Repeat steps 2 and 3 for the next effects.
5. After calibrating all effects, touch the [confirm] to save all adjusted values and reset the fixture.
Calibration via the DMX controller
1. Connect DMX controller to the fixture and set fixture effects to the desired positions before fine calibration.
2. Enter the "Calibrate Effects" menu and now you can exactly calibrate desired effects by DMX controller.
There is a calibration protocol:
Effect Mode 1 Mode 2
Pan channel 33 channel 27
Tilt channel 34 channel 28
Colour wheel channel 35 channel 29
Cyan channel 36 channel 30
Magenta channel 37 channel 31
Yellow channel 38 channel 32
Static Gobo channel 39 channel 33
Rot. Gobo Wheel channel 40 channel 34
R. Gobo Index 1 channel 41 channel 35
R. Gobo Index 2 channel 42 channel 36
R. Gobo Index 3 channel 43 channel 37
R. Gobo Index 4 channel 44 channel 38
R. Gobo Index 5 channel 45 channel 39
R. Gobo Index 6 channel 46 channel 40
R. Gobo Index 7 channel 47 channel 41
Prism channel 48 channel 42
Prism rot. channel 49 channel 43
Zoom channel 50 channel 44
Frost 1/1 channel 51 channel 45
Frost 1/2 channel 52 channel 46
Focus channel 53 channel 47
Iris channel 54 channel 48
After having calibrated all effects, touch the [confirm] to save adjusted values and reset the fixture.
Load Default Calibrations - The item loads default (factory) calibration values.
Updating software - The menu item allows you to update software in the fixture.
The following items are required in order to update software:
- PC running Windows or Linux or macOS
- DSU file
- Flash cable RS232/DMX, P/N13050624 (if you want to use a serial port of PC)
- Robe Universal Interface or Robe Universal interface WTX (if you want to use an USB port of PC)
After the software updating the fixture will be set to default values.