6
igoes goes from position to position.
Gobo Wheel Moving
- The menu item enables to close light output while the rot. gobo
wheel goes from position to position.
Init Effect Positions
- Use the menu to set all effects to the desired positions at which they will stay after
switching the fixture on without DMX signal connected.
Screen Settings
- Use this menu to change the touch screen settings.
Display Intensity
- The item allows to control the intensity of the screen (1-min., 10-max.).
Screen saver Delay
- The item allows you to keep the screen on or to turn it off automatically after -0
minutes after last touch (or pressing any button on the control panel).
Touchscreen Lock
- The item allows you to lock the screen after last touch (or pressing any button on the
control panel). The time delay can be set in range of -0 minutes.To unlock the screen, press the
[ENTER/Display On] button.
Recalibrate Touchscreen
- The item starts calibration of the touchscreen. Follow the instructions on
the screen.
Display Orientation
- The menu allows to change display orientation.
Normal
- Standard display orientation if the fixture is placed horizontally (e.g. on the ground).
Inverted
- Inverted orientation (needed if the fixture is hanging on the truss).
Auto
- The option activates a gravitation sensor for automatic screen orientation.
Note:
Auto
option is set as default. You change the display orientation by touching the icon
on the display,
an the option set in the "Display Orientation" menu is temporarily overriden.
Temperature unit
- Use the menu item to change temperature unit from °C to °F.
Fan Mode
- Use the menu to set the fixture fans to max. power mode ("
High
") or to auto-control mode
("
Auto
").
Date & Time Settings
- Use this menu to set current date and time for the fixture log system (menu "
View
Logs
"). Set this menu item before first fixture operation.
Unlink Wireless Adapter
- The menu serves for unlinking the fixture from the transmitter (only WDMX ver
-
sion)
Default Settings
- The menu item allows to set all fixture parameters to the default (factory) values.
6.4 Tab "Manual Control"
Reset Functions
- The menu allows to reset the fixture either per function modules or all modules together.
Total Reset
- The item resets all function modules.
Pan/Tilt Reset
- The item resets a pan and tilt movement.
Colour System Reset
- The item resets a colour wheel.
Gobo System Reset
- The item resets a static/rotating gobo wheel.
Strobe Reset
- The item resets strobe lamellas and a hot-spot module.
Optics/Prism/Frost Res.
- The item resets a zoom, focus, prism and a frost module.
Preset Effect Control
- Use the menu to show preset positions of each channel effect.
Manual Effect control
-
Use the menu to control all fixture channels by means of the control panel.
6.5 Tab "Stand-alone"
Demo
-
Use the menu to run a demo program without an external controller, which will show you some
possibilities of using Robin Pointe. Adjust the "Pan", "Tilt", "Focus St. Gobos" and "Focus Rot. Gobos. to desired
positions and select option:
Summary of Contents for ROBIN Pointe
