manualshive.com logo in svg

Robe ROBIN Pointe, User Manual

Share
Download
Robe ROBIN Pointe User Manual Download Page 15

5

Ethernet / DMX operation

Option “ Artnet" (gMaI or gMA2 or sACN) has to be selected from “Ethernet Mode” menu at first fixture.

Option “Ethernet To DMX” has to be selected from the “Ethernet Mode” menu at the first fixture (connected to 

the Ethernet) in the fixture chain, next fixtures have standard DMX setting.

Connect the Ethernet-input of the first fixture in the data chain with the network. Connect the DMX output of 

this fixture with the input of the next fixture until all fixtures are connected to the DMX chain.

Caution: 

At the last fixture, the DMX chain has to be terminated with a terminator. Solder a 120 

Ω

 resistor 

between Signal (–) and Signal (+) into a XLR-plug and connect it in the DMX-output of the last fixture.

 

DMX address= 

 

       

DMX address=4 

 

     DMX address=9

 

 IP addres=00.68.00.00

 

 Universe=0 

 

 

DMX address= 

    

 

DMX address=4 

     DMX address=9

 

IP addres=00.68.00.003

 

Universe= 

 

Summary of Contents for ROBIN Pointe

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands