7
3.2 Installing the diffusion filter
Disconnect the fixture from mains before diffusion filter installation
1. Disconnect the fixture from mains.
2. Unscrew the fastening screw (5) and carefully remove front glass (7) from the fixture.
3. Insert the screw (1) with the plastic washer (2) into diffuser (3) and secure it by means of the
plastic washer (4.) Put on the front glass (7) onto the screw (1) and secure it again by means of the
plastic washer (4.)
Note: Use the screw inclosed in the diffusion filter set as the fastening screw (1).
4. Insert the diffuser (3) with the front glass (7) into the Parfect 100 and secure it by screwing the screw (1)
into the thread hole in the plastic eggcrate. Keep the correct orientation of the diffuser sections (6).
