27
Important: The correct order of parts at the mounting yoke assembly is: insertion piece+rubber yoke+me-
tal tilt lock (on both sides of the device). The correct orientation of the insertion piece must be kept.
10.1 Replacing the fuse
Replace the fuse by a fuse of the same type and rating only.
Before replacing the fuse, unplug mains lead!
1) Remove the fuse holder on the rear panel of the base with a fitting screwdriver from the housing(anti-clockwise).
2) Remove the old fuse from the fuse holder.
3) Install the new fuse in the fuse holder (only the same type and rating).
4) Replace the fuseholder in the housing and fix it.
11. Photometric diagrams
Copyright © 2014-2022 Robe Lighting - All rights reserved
Specifications are subject to change without notice.
May 31, 2022
Made in ROBE Lighting s.r.o., Palackého 416, 757 01 Valašské Meziříčí, Czech Republic
