38
Dimensions (mm)
11. Maintenance and cleaning
It is absolutely essential that the fixture is kept clean and that dust, dirt and smoke-fluid residues must not build
up on or within the fixture. Otherwise, the fixture‘s light-output will be significantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the fixture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning fluid is recommended, under no circumstances
should alcohol or solvents be used!
DANGER !
Disconnect from the mains before starting any
maintenance work
The head´s transparent cover will require weekly cleaning as smoke-fluid tends to building up residues, reduc
-
ing the light-output very quickly. The cooling fans should be cleaned monthly.
The interior of the base should be cleaned at least annually using a vacuum-cleaner or an air-jet.
Remove dust and dirt from the fans and cooling vents using a soft brush and vacuum-cleaner.
Important! Check the air filter periodically and clean before it becomes
clogged!
Clean air filter placed in the fixture´s base (the cover of the air filter is fastened by magnets). Use a vacuum
cleaner, compressed air or you can wash them and put back dry.
After replacing the air filter, reset the elapsed time counter in the menu "Information" (Information--->Air Filters-
--> Elapsed Time).
More complicated maintenance and service operations are only to be carried out by authorized distributors.
Summary of Contents for Robin 1200
