1
Following item are common for all zones:
MACr.
- a macro selection,value 0-255
Stro.
- a strobe,value 0-255
dimr.
- a dimmer,value 0-255
F.tim.
- fade time,value 0-255 *
S.tim.
- standing time,value 0-255 *
COP.
- copying the current prog. step to the next prog. step.
Press [ENTER]-button to confirm adjusted value .
5.Repeat steps 3 and 4 for next prog.step.If you want to copy current prog. step to the next prog.step, select
option "COPY."and confirm it by pressing [ENTER].
*Both Fade time and Standing time use the same conversion table in order to convert DMX value to the time
value:
DMX
Time
[sec.]
DMX
Time
[min.]
DMX
Time
[min.]
DMX
Time
[min.]
DMX
Time
[min.]
1
0.1
50
4.
105
18.4
160
42.7
215
77
2
0.4
55
5
110
0.
165
45.4
220
80.7
5
.5
60
6
115
170
48.2
225
84.4
10
10
65
7
120
4
175
51
230
88.2
15
.5
70
8.2
125
6
180
54
235
92
20
40
75
9.4
130
28.2
185
57
240
96
25
6.5
80
10.7
135
0.4
190
60.
245
100
30
90
85
1
140
32.7
195
6.4
250
104
35
1.5
90
1.5
145
5
200
66.7
255
108
40
160
95
15
150
37.5
205
70
45
0.5
100
16.7
155
40
210
73.5
Exact expression of the time value follows the formula: time[sec.]=(DMX value)
/10.
If Item "
AUto
" is on,the fixture in DMX mode remembers last running program and this program will run after
switching on the fixture.
7.3 Manual mode
This menu gives access to the control of the fixture channels by means of the control buttons.
Use [UP] and [DOWN] buttons until the display shows "
MAn.C.
" menu.Press [ENTER] button and by using [UP]
and [DOWN] buttons select desired effect,press [ENTER] and and by using [UP] and [DOWN] buttons adjust
desired DMX value for selected effect.Confirm by [ENTER].
rEd
- all red LEDs saturation,value 0-255
rEd.1
- a red LEDs 1 saturation,value 0-255
GrEE.
- all green LEDs saturation,value 0-255
GrE.1
- a green LEDs 1 saturation,value 0-255
bLuE
- all blue LEDs saturation,value 0-255
bLu.1
- a blue LEDs 1 saturation,value 0-255
rEd.2
- a red LEDs 2 saturation,value 0-255
MACr.
- a macro selection,value 0-255
GrE.2
- a green LEDs 2 saturation,value 0-255
Stro.
- a strobe,value 0-255
bLu.2
- a blue LEDs 2 saturation,value 0-255
dimr.
- a dimmer,value 0-255
7.4 Test sequences
Use the item to run a special demo-test sequences without an external controller,which will show you some
possibilities of using the fixture.
