background image

1. Introduction

Thank you for choosing an ROBE FAZE 800 FT PRO. You now own a rugged and powerful state-of-the-art 

machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions 

found in this user manual, you can look forward to the reliable and satisfactory performance of your ROBE 

FAZE 800 FT PRO machine for years to come.

Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your 

faze machine.

2. Cautions

Risk of electric shock. 

Disconnect the appliance from the electric supply before removing the cover. 

 

Note:

 There are no user serviceable parts inside.

Danger of electric shock

Keep this device dry.

For inside use only. Not designed for outside use. 

 

Prior to use take care to determine that the unit is installed at the rated voltage.

Always unplug your ROBE FAZE machine before filling its tank.

Unplug the machine when not in use.

This machine is not water - or splash-proof. If moisture, water, or fog liquid gets inside the housing, immediately 

unplug the unit and contact a service technician or your ROBE distributor before using it again.

No user serviceable parts inside. Refer to your ROBE distributor or other qualified service personnel.

Danger of Burns

For adult use only.  Never leave the unit running unattended.  

Never aim the output nozzle directly at people.

Faze machine output area is very hot. Avoid coming within 60 cm of the output nozzle during operation.

Locate the fog machine in a well-ventilated area. Never cover the unit's vents. In order to guarantee adequate 

ventilation, allow a free air space of at least 0 cm around the sides and top of the unit.

Never aim the output nozzle at open flames.

If the supply cord is damaged, it must be replaced by manufacturer or its service agent or similarly qualified 

personnel in order to avoid a hazard.

The output nozzle becomes very hot during operation. Keep flammable materials at least 50 cm away from 

the nozzle.

Always allow your FAZE 800 FT PRO to cool down before attempting to clean or service it.

Danger of Explosion

Never add flammable liquids of any kind (oil, gas, perfume) to the fog liquid.

Use only original liquid recommended by ROBE distributor. Other fog liquids may cause clogging or "spitting".

Always make sure there is sufficient liquid in the fog liquid tank. Operating this unit without liquid will cause 

damage to the pump as well as over-heating of the heater.

If your ROBE FAZE machine fails to work properly, discontinue use immediately. Drain all fog liquid from the 

tank, pack the unit securely (preferably in the original packing material), and return it to your ROBE distributor 

for service.

Always drain tank before mailing or transporting this unit.

Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in contact with skin or 

eyes, rinse thoroughly with water.

Pay attention to all warning labels and instructions printed on the exterior

of your FAZE 800 FT PRO

Summary of Contents for FT Series









Reviews: