Divine 160 RGBW
18
Auto. --- Automatic playback
. This function allows you to select the program which will be played after switching
the fixture on. Selected program will be played continuously in a loop.
1.
Use the UP/DOWN buttons to select test program (“tESt”), user program (“u.PrG”) or disable this function
(OFF).
2.
Press the ENTER button to confirm the choice.
PLAY ---
Playing program
. Entering this menu provides a complete overview of all programs offered, from which
the selected program can run.
1.
Use the UP/DOWN buttons to select desired program.
2.
Press the ENTER button. The selected program runs in a loop.
Edit --- Editing a program
. The fixture offers a freely editable program up to 40 steps. Every program step includes
a step time-the total time occupied by the step in the program and a fade time- during which effects move to new
positions.
1.
Use the UP/DOWN buttons to select a desired program step ("St.01" - "St.40") and press ENTER button.
2.
Use the UP/DOWN buttons to select a channel you want to edit and press the ENTER button.
List of editable items:
“P.End” -
a total number of the program steps (value 1-40). This value should be set before start of
programming (e.g. if you want to create a program with 10 steps, set P.End=10).
“Func” – a channel Special Functions
“rEd.1” – a red LEDs saturation coarse- zone 1
“GrE.1” – a green LEDs saturation coarse- zone 1
“bLU.1” – a blue LEDs saturation coarse- zone 1
“VhI.1” – a white LEDs saturation coarse- zone 1
“rEd.2” – a red LEDs saturation coarse- zone 2
“GrE.2” – a green LEDs saturation coarse- zone 2
“bLU.2” – a blue LEDs saturation coarse- zone 2
“VhI.2” – a white LEDs saturation coarse- zone 2
“rEd.3” – a red LEDs saturation coarse- zone 3
“GrE.3” – a green LEDs saturation coarse- zone 3
“bLU.3” – a blue LEDs saturation coarse- zone 3
“VhI.3” – a white LEDs saturation coarse- zone 3
“rEd.4” – a red LEDs saturation coarse- zone 4
“GrE.4” – a green LEDs saturation coarse- zone 4
“bLU.4” – a blue LEDs saturation coarse- zone 4
“VhI.4” – a white LEDs saturation coarse- zone 4
“Cto” – a colour temperature correction
“Vir.C.” – a virtual colour wheel
“Stro.“ - a strobe/shutter
“dinr“ - a coarse dimmer
“din.F” a fine dimmer
“F.tin” a fade time
“S.tin” a step time
“COPY“ – this item duplicates the current prog. step to the next prog. step.
Note: Items in this menu depend on selected DMX mode.
3.
Use the UP/DOWN buttons to set a DMX value of the channel and then press the ENTER button.
4.
Use the UP/DOWN buttons to select next channel and press the ENTER button.
5.
After having set all channels in the current program step, press the ESCAPE button to go one menu level
back and select another program step.
