0
"Pan Fine"
- a fine pan, value 0-255
"Tilt"
- a coarse tilt, value 0-255
"Tilt Fine"
- a fine tilt, value 0-255
"Pan/Tilt Speed "
- a speed of pan/tilt movement, value 0-255
"Spec. Func."
- a special functions, lamp on/off, reset, value 0-255
"Pan/Tilt Macro"
- a pan/tilt macro, value 0-255
"P./T.Macro Speed"
- a pan/tilt macro speed, value 0-255
"Colour Wheel"
- a colour wheel, value 0-255
"Cyan"
- a cyan, value 0-255
"Magenta"
- a magenta, value 0-255
"Yelow" -
an yellow, value 0-255
"Conversion Filter" -
a conversion temperature filter, value 0-255
"CMY Colour Macro" -
a CMYcolour macro, value 0-255
"Effect Speed" -
a effect speed, value 0-255
"Effect Speed. Assig." -
a effect speed assigning,value 0-255
"Gobo Wheel " -
a rotating gobo wheel , value 0-255
"Gobo Indexing" -
a gobo - coarse indexing and rotation, value 0-255
"Frost " -
a frost effect, value 0-255
"Iris" -
an iris, value 0-255
"Zoom" -
a zoom, value 0-255
"Focus" -
a focus, value 0-255
"Framing shutters rotation" -
a rotation of blades, value 0-255
"Shutter 1- movement" -
a movement of the shutter 1 from outward to invord, value 0-255
"Shutter 1- swivelling" -
a swivelling of the shutter 1 in range of -20° to + 20°, value 0-255
"Shutter 2- movement" -
a movement of the shutter 2 from outward to invord, value 0-255
"Shutter 2- swivelling" -
a swivelling of the shutter 2 in range of -20° to + 20°, value 0-255
"Shutter 3- movement" -
a movement of the shutter 3 from outward to invord, value 0-255
"Shutter 3- swivelling" -
a swivelling of the shutter 3 in range of -20° to + 20°, value 0-255
"Shutter 4- movement" -
a movement of the shutter 4 from outward to invord, value 0-255
"Shutter 4- swivelling" -
a swivelling of the shutter 4 in range of -20° to + 20°, value 0-255
"Shutter/Strobe" -
a shutter and strobe,value 0-255
"Dimmer" -
a dimmer intensity-coarse, value 0-255
"Dimmer Fine" -
a dimmer intensity-fine, value 0-255
5. Select „Save” or „Save and Copy” and press [Enter] to confirm adjusted values:
"Save" -
saving the current prog. step
"Save and Copy" -
saving and copying the current prog. step to the next prog. step.
6. Go on next prog. step and repeat this procedure (steps 4 and 5).
After creation the program, you can simply reduced its length (by changing the start/end steps) using the „Start Step” and
„End Step” menu.
9.8 Reset functions
The ColorSpot 1200E AT can be reset totally or by function modules. Select relevant function to run a reset:
Reset All
- This function enables the fixture to index all effects and return to their standard positions.
Pan/Tilt
- This function resets pan and tilt.
Colour System
- This function resets colour wheel and CMY/conversion filter module.
Gobo System
- This function resets both rotating gobo wheels 1 and 2.
Dimmer/Strobe
- This function resets dimmer/strobe module.
Zoom/Focus/Frost
- This function resets focus,zoom and frost.
Iris/Framing shutters
- This function resets iris and framing shutters.
9.9 Special functions
Use this menu for special services like adjusting lamp or adjusting effects.
Lamp Adjustment
- This function can be used when you make the fine adjustment of the lamp. If you select this function,
all effects will be canceled, shutter will be opened and the dimmer intensity will be set onto 100%. By using the
options
„PAn, Tilt, Zoom, Focus”
you can focus the light on a flat surface (wall) and perform the fine lamp
adjustment.
Effect Adjustment
- By this function you can calibrate and adjust the effects to their standard/right positions. Disconnect
the DMX controller from the fixture and select
„DMX Values”
menu. The display shows step by step effects by
which you can adjust the fixture to the required position before the function calibration. When the positioning is
finished, select
„Calibrate Values”
and press [ENTER]:
1. Calibration via the control board
Select desired effect, press [ENTER] and adjust its right value (0 - 255). This can be repeated for each calibred effect if it
is required. When the calibration is finished, it is necessary to use the
„Save and Reset”
function to write the calibration
values to the memory and to make a reset in order to check the newly adjusted positions of the calibrated effects.
List of the calibrate effects:
Pan
Gobo Wheel
Shutter 2
Tilt
Gobo Indexing
Shutter 3
Colour Wheel
Shutter 4
