8
9
4.3 Changing the power supply settings
Both the transformer and the ballast must be connected correctly for the local AC voltage and frequency.
The wrong settings can cause poor performance or demage of the fixture head.The factory settings are printed
next to the power cord on the front panel.
If you want to change the power supply settings,follow the instructions:
EU version:
1.Disconnect the fixture from AC power.
2.Remove the top cover of the fixture by loosening the
4 screws.
3.Move the wire 1 on the transformer connection block
to the position according to the desired voltage.
4.Move the wire 2 on the ballast connection block to
the position according to the desired
frequency/voltage.
US version:
1.Disconnect the fixture from AC power.
2.Remove the front cover by loosening the 4 screws.
3.Move the wire 1 on the transformer connection block
to the position according to the desired voltage.
4.Move the wire 2 on the ballast connection block to
the position according to the desired frequency.
transformer
ballast
Summary of Contents for ClubScan 150CT
Page 1: ...Version 2 3 ...
