14
15
8. Functions of the control panel
The control panel situated on the front cover of the scan offers several features. You can simply set the DMX
address or master (slave) mode,switch On and Off the lamp,run a test,make a reset and also use other func-
tions for setting fixture behaviour.
Control elements on the control board:
[ENTER] button- enters menu,confirms adjusted values and leaves menu.
, [UP] button and[DOWN] button- moves between menu items on the the same level, sets values.
In order to leave the menu without saving value,press [UP] and [DOWN ] at the same time.
After switching the fixture on,the display shows the initial DMX address:
Use [UP],[DOWN] to browse through the menu. To select a function or submenu,press [ENTER].
8.1 Fixture Address
Use this menu to set the DMX address of the fixture which is defined as the first channel from which the fixture
will respond to the controller.
For address setting follow this procedure:
1.
Switch On the fixture and wait until the fixture reset has finished (
"rES"
is flashing at the display).
2.
Browse through the menu by pressing the [UP] and [DOWN] keys until the display shows current addres
"001"
.Confirm by pressing [ENTER] key and
"001"
will start to flash frequently.
3.
Use the [UP] and [Down] keys to select the desired address.
4.
Confirm by pressing [ENTER].
After having addressed fixtures, you may now start operating fixtures via your lighting controller.
8.2 Microphone sensitivity
Select this function to adjust the microphone sensitivity from 1(maximum) to 20(minimum).
8.3 Demo-test sequences
Use the item to run a built-in demo-test sequences without an external controller,which will show you some
possibilities of using the fixture.
8.4 Stand-alone setting
Select this menu to set fixture behaviour in stand-alone mode.
r.Pr.
---
Running program.
Select this menu to run a program in a loop.
St.M.
---
Stand-alone mode.
This function allows you to set the fixture as master or as slave:
OFF.
--- The option disables Master/slave operation.
Mst
---
Master.
This function sets the fixture as a master.
SLA
---
Slave.
This function sets the fixture as a slave.
Aut.
---
Automatically playback.
This function allows you to play the program automatically after switching the
fixture on.The program will be played continuously in a loop.
Summary of Contents for ClubScan 150CT
Page 1: ...Version 2 3 ...
