CityFlex 48/CityFlex 48 Wireless DMX
7
Caution: Terminate the link by installing a termination plug in the output of the last fixture. The termination plug is
a male 3-pin XLR plug with a 120 Ohm resistor soldered between Signal (–) and Signal (+).
3.4 Wireless DMX operation
The wireless version of the CityFlex 48 is equipped with the Lumen Radio CRMX module and antenna for receiving
DMX signal. CRMX module operates on the 2.4 GHz band.
1.
Select wireless DMX input from the menu
PErS
(PErS-->dM.IM.-->dM.UL.).
2.
To link the fixture with DMX transmitter.
The fixture can be only linked with the transmitter by running the link procedure at DMX transmitter .
After linking , the level of DMX signal ( 0-100 %) is displayed in the menu
item “r
.InF
“ (SPEC-->rAdI.--> r.InF.)
3.
To unlink the fixture from DMX transmitter.
The fixture can be unlinked from receiver via the menu item “ r
.UnL
.“ (SPEC-->rAdI.--> r.UnL.).
Summary of Contents for CityFlex 48
Page 1: ...Version 1 9 ...
