CityFlex 48/CityFlex 48 Wireless DMX
18
Upd.
--- Pixels update
. Besides the main control electronics in the fixture base every pixel
contains its own control driver. After standard software updating of the control electronics via the menu “SPEC”,
this pixels update has to be performed if some software changes are required in the pixel drivers.
In.Po.
---
Init effect positions.
Use this function to set all effects to the desired positions to which they will move
after switching the fixture on (if DMX is not being received). Confirm adjusted values by pressing the item “Stor”.
C.C.Mo.
---
Colour calibration mode.
If the functin is on, the white output from the fixture (and also mixed colours) is
more uniform. Each colour is dynamically corrected according to the value set in the menu "C.CAL" (SPEC-> C.CAL).
dF.SE.
---
Default Settings .
The menu item sets all fixture parameters to the default (factory) values.
6.4 Manual mode
Use this menu for control the fixture without DMX console.
Note: The number of items depends on the selected DMX mode in the menu “dM.Pr” (PerS—>dM.Pr.)
6. 5 Test sequences
Use this menu to run demo-test sequences without an external controller, which will show you some possibilities
of using the CityFlex 48.
6.6 Stand-alone setting
The fixture is not connected to the controller but can execute pre-set programs.
Auto. --- Automatic playback
. This function allows you to select the program which will be played after switching
the fixture on. Selected program will be played continuously in a loop.
1.
Use the UP/DOWN buttons to find “
St.AL.
“ menu.
2.
Press the ENTER button.
3.
Use the UP/DOWN buttons to select “
Auto
“ item.
Summary of Contents for CityFlex 48
Page 1: ...Version 1 9 ...
