Eminere Side wireless DMX
6
Fixture´s Amphenol connectors are dust and water protected according to IP 67 by mating with related Amphenol
connectors.
They cannot stay disconnected outdoor.
The output panel connector at last fixture in the Eminere Sides chain has to always be covered with the water-
tight cap to keep declared IP rating.
Do not connect (disconnect) Eminere Sides to the Booster box and each other when they are under voltage!
Direct visibility between a transmitter and the Eminere Side Wireless DMX must be ensured without
no obstacles (bildings, trees,....).
Distance between a DMX transmitter and the Eminere Side Wireless DMX depends on transmission range of used
DMX transmitter, surrounds etc (we recommend to test behaviour of DMX transmitter with the Eminere Side
Wireless DMX before installation).
Examples of connection
The Eminere Side can be only linked to a transmitter by running the link procedure at DMX transmitter .
The Eminere Side can be unlinked from the transmitter by running the unlink procedure at DMX transmitter or by
switching off/on the Eminere Side three times while the transmitter is switched off.
During off/on unlink procedure, the Eminere Side has to be switched on for 5 seconds in steps 1-3:
Step 1: Eminere Off, Eminere On (5s)
Step 2: Eminere Off,Eminere On (5s)
Step 3: Eminere Off, Eminere On (5s)
Step 4: Eminere Off, Eminere On
Successful unlink is signalized by flashing LEDs at fourth switching the Eminere Side Off and On. If the LEDs flashing
will not appear, probably the 5 seconds period has not been kept and you have to repeat the Off/On procedure to
unlink the fixture from the DMX transmitter .
DMX addressing of connected Emineres Side has to be done manually by means of the Robe Universal Interface
WTX and the software RDM Manager.
Number of connected Emineres Side in DMX chain also depends on their cable length, power voltage and type of
Emineres Side.
