Eminere Wireless DMX
5
3. Installation
3.1 Mounting the fixture
The Eminere can be arranged in any orientation on a flat, non-flammable surface by means of two mounting
brackets (5), the LED module (2) can be tilted (+95°/-95°) to get access to mounting brackets (5).
Ensure that the structure to which you are attaching
the unit is secure.
3.2 Connection to mains
The unit must be installed by a qualified electrician in accordance with all national
and local electrical and construction codes and regulations.
This device falls under class one and must be grounded!
The Eminere is equipped with auto-switching power supply that automatically adjusts to any 50/60Hz AC power
source from 120-277 Volts.
The following wiring of the input/output connectors applies to the fixtures marked
X
on their labels only. Older
versions of the Emineres have swapped D- and D+ and do not have mark
X
on their labels.
E.g.
Input
- panel connector
Output
- panel connector
(front view)
(front view)
Fixture´s Amphenol connectors are dust and water protected according to IP 67 by mating with related Amphenol
connectors.
They cannot stay disconnected outdoor.
Summary of Contents for Anolis Eminere 1 Wireless DMX
Page 1: ...Version 1 4 ...
