2
To connect needed cables to the fixture, unscrew two screws (4) from the plastic cover (3).
The connection blocks (5) have the following wiring:
The primary power input serves for a standard power (e.g. ArcPower for Ambiane).
The secondary power input serves for a backup power( in case that primary power failed).
If both power inputs are under voltage, the primary power has a priority and the secondary power is disabled.
In case of primary power loss, the secondary power is enabled.
If the fixture is supplied via the secondary power, the light output of the fixture is a white colour (3200K) and its
light intensity can be set by a trimmer.
The fixture can be controlled by one of the following methods: DMX 512
DALI
The fixture is equipped with two DMX and DALI connection blocks for easy connection to DMX or DALI chain
(In/Out method).
DMX connection
Power connection
PCB
Function PCB
Function
0V
-
Shield
+ Power
+
D+
Signal (+)
-
Power -
D-
Signal (-)
3. DMX and DALI address setting and control
The DIP switch, located next to the connection blocks, allows to run a test light and switch the fixture to the
update mode in case of software update.
