Dear customer, we are pleased that you have chosen the
programming card from our product range. With this device
you have a powerful tool to easily program your
ROCONTROL controller.
Despite the relatively simple operation of the programming
card, its use requires some knowledge from you. These
instructions will enable you to quickly familiarize yourself with
the possibilities of the programming card. To achieve this goal
safely and quickly, you should read the operating instructions
carefully before starting up the device.
SAFETY INSTRUCTIONS
General Hazard Information
Please note for all our deliveries: Please read these safety and hazard notes first, and then read
through all operating and assembly instructions completely and carefully before commissioning for
the first time. Remote-controlled models are not a toy and must be used by children under the age
of 14 years only under the constant supervision of adults who are familiar with construction,
operation, materials and potential hazards. The construction, commissioning and operation of
remote-controlled models are dangerous and are the operator's responsibility. We expressly point
out these dangers and assume no liability. Careful, well-considered handling during operation
protects against personal injury and damage to property. Carry out maintenance and inspection of
your models and electrical equipment at short, regular intervals. Regularly check the secure fit of
all fasteners.
Applies to all remote-controlled models:
•
Make sure that nobody else in the environment uses your transmission frequency.
•
switch on: Switch on the transmitter first and then switch on the receiver.
•
turn off: Turn off the receiver first, then turn off the transmitter.
•
Make sure that the transmitter and receiver are fully charged before starting.
In addition, please observe the following instructions:
•
Do not use different types of batteries or rechargeable batteries or new and used batteries
together. Remove dead batteries from the equipment, especially if they are not used for a
long time.
•
Never expose electrical equipment to dirt, dust, moisture, cold or heat. Cable damage can
lead to short circuit, fire and destruction of the devices!
•
Avoid injury through caution in all activities with your models.
•
Check with your insurance company whether the risks arising from your models are covered
by liability insurance or whether you have to insure them additionally.
•
Adhesives and varnishes contain solvents that can be harmful to health. Follow the
manufacturer's instructions and warnings.
Programming card
