8
Building and Operating Instructions - PILATUS PC-6 ARF
No. FW004002
3. Installing the tailplane
Glue the two "winglets" to either end of the tail-
plane using cyano.
Glue the elevator hinges in the elevator and tail-
plane using cyano. Allow the glue to set hard,
then check that the elevator deflects freely in
both directions. Make any adjustments required.
The tailplane can now be screwed to the fuse-
lage.
Position the tailplane exactly at right-angles
to the fuselage centreline (see illustration
No. 4).
4. Installing the fin
Glue the rudder hinges in the rudder and fin
using cyano. When the glue has set hard, check
that the rudder deflects freely to both sides.
Make any adjustments required.
Glue the prepared fin assembly to the fuselage
using cyano.
Take care to set the tailplane exactly at right-
angles to the fuselage centreline (see illus-
tration).
3
4
PM 3 x 16 mm
Winglet
Winglet
2 mm
Reinforcement
Washer
3 I.D. x12 O.D.
