ROBBE harbour tug FAIRPLAY Installation Manual Download Page 3

3

Modellbau Lindinger

 GmbH hereby declares that this device complies with the essential requirements and other relevant regulations of the corresponding CE directives. The 

original declaration of conformity can be found on the Internet at www.

robbe.com

or on request.

This product can be operated in all EU countries.

This symbol means that small electrical and electronic equipment must be disposed of at the end of its useful life, separated from household waste. Dispose of the equipment 

at your local municipal collection point or recycling centre. This applies to all countries of the European Union and other European countries with a separate collection system.

G

uarantee

Our articles are of course equipped with the legally required 24 months warranty. Should you wish to assert a justified warranty claim, always contact your dealer, who is responsible for the 

warranty and the processing. During this time, any functional defects that may occur, as well as manufacturing or material defects, will be remedied by us free of charge. Further claims, e.g. 

for consequential damages, are excluded.

The transport to us must be free, the return transport to you is also free. Freight collect shipments cannot be accepted. We cannot accept liability for transport damage and loss of your 

consignment. We recommend appropriate insurance. 

To process your warranty claims, the following requirements must be met:

Attach the proof of purchase (receipt) to your shipment.

The units have been operated in accordance with the operating instructions.

Only recommended power sources and original robbe accessories have been used.

There is no moisture damage, external interference, reverse polarity, overloading or mechanical damage.

Attach relevant information for finding the fault or defect.

A

ssertion

Ground-based models are usually covered by personal liability insurance. Additional insurance or extension is required for aircraft models.

Check your insurance policy (private liability) and take out insurance if necessary.

disclaimer of liability

The observance of the assembly and operating instructions as well as the conditions and methods for installation, operation, use and maintenance of the model components cannot be 

monitored by robbe Modellsport.

Therefore, we accept no liability whatsoever for losses, damages or costs arising from or in any way connected with incorrect use and operation. To the extent permitted by law, the obligation 

to pay damages, for whatever legal reasons, is limited to the invoice value of the robbe products directly involved in the event causing the damage. This does not apply if liability must be 

unlimited due to intent or gross negligence in accordance with mandatory statutory provisions.

Assembly instructions harbour tug 

FAIRPLAY No. 1199

1199_Fairplay.indd   3

08.07.16   22:39

Summary of Contents for harbour tug FAIRPLAY















Reviews: