background image

Order Number

40 MHz      No. F4044

FC-16 Boat `n Truck

21

30 

POST OFFICE REGULATIONS

The R&TTE (Radio Equipment & Telecommunications Terminal 

Equipment) directive is the new European regulation which ap-

plies to radio systems and telecommunications equipment, and 

is applicable to all such equipment which has general conformity 

approval in the EC. 

Part of the R&TTE directive regulates the setting up and operation 

of radio systems in the European Community. 

An important change compared with earlier regulations is the ab-

olition of approval procedures. The manufacturer or importer must 

submit the radio system to a conformity assessment procedure 

before marketing the equipment, and is obliged to notify the ap-

propriate authority when the process is completed. 

The  CE  symbol  is  applied  to  all  such 

equipment, and indicates that it fulfils 

the  currently  valid  European  norms. 

An exclamation mark is also applied to 

radio transmitting equipment as an in-

dication that the approved frequencies 

are not uniform throughout Europe. 

This symbol is used in all the countries of the European Union. 

Other nations such as Switzerland, Norway, Estonia and Sweden 

have also adopted this directive. Your radio control system is re-

gistered (i.e. approved) in all these countries, and can legally be 

sold and operated there. 

Please note that this radio control system may only be operated 

on the frequencies approved for use in your country. A frequency 

table is supplied with your system. 

We are obliged to point out that the responsibility for this, and 

also for operating a radio system which fulfils the requirements of 

the directives, rests with you, the user. In Germany radio control 

systems for models operating in the frequency bands of 27 MHz, 

35 MHz and 40 MHz do not need to be registered or licensed, and 

no fee is payable, but this may not apply in the country in which 

you live. In Germany a ‘General Licence’ to use these frequencies 

is granted by right. A copy of this General Licence is supplied with 

your system.

Before using the system please check whether you need to regi-

ster or license your radio control equipment in the country where 

you intend to operate it.

31.   CONFORMITY DECLARATION (CE MARK)

Robbe Modellsport GmbH & Co. KG declares that this device 

is made in accordance with the fundamental requirements and 

other relevant regulations of the appropriate CE directives. The 

original certificate of conformity may be viewed at 

www.robbe.

com

 under the particular device description by pressing the Logo 

button “conform”.

32.  ACCESSORIES

3-position proportional chan-

nel switch, long

 

 

No F1588

Expands  Tx  with  a  3-position 

switch  channel,  also  used  as 

switch channel in Multi-Module.

3-position proportional chan-

nel switch, short

 

 

No 1500

Expands  Tx  with  a  3-position 

switch  channel,  also  used  as 

switch channel in Multi-Module.

Latching  Mix-switch,  2-posi-

tion, short

 

No F1523

For switching mixers on and off

Biased Mix-switch, 2-position, 

long

 

 

No F1504

For momentary switching mixers 

on and off

Mix-switch, 2-position, short

 

 

No F1502

For switching mixers on and off

Mix-switch, 2-position, long

 

 

 

No F1521

For switching mixers on and off

Mix-switch, 3-position, long

 

 

 

No F1522

For switching mixers on and off

Mix-switch, 3-position, short

 

 

No F1503

For switching mixers on and off

Summary of Contents for Futaba FC-16 Boat`n Truck

























Reviews: