8
Changing the transmitter throttle stick
Operating Instructions,BLUE ARROW NANO LOOP 2.4 GHz No. S2531
1. Open the battery box cover. Remove the
battery retainer, unplug the battery plug
from the socket in the transmitter.
2. Remove the transmitter rear cover. This
is done by removing the six retaining
screws on the rear face.
3. Unscrew screws "A“ and "B“ and remove
the throttle spring "C“. Now loosen the
fi xing screw "D" (Fig 2).
4. Move the return spring to the and re-
place the retaining screw "D“. Retain the
throttle spring "C" with screws "A" and "B"
(Fig 3). Using screw "A", one can set the
pressure of the throttle spring. Check the
correct function of the joysticks. Screw
the backplate on and replace the battery
box.
Important:
to avoid damaging the trans-
mitter components, please work in a ca-
reful manner.
Fig. 1
Fig. 2
Fig. 3
A
B
C
D
A
B
C
D
front
black propeller
rear
(orange propeller)
Pitch-axis
Rotational
speed
Yaw
Roll-
axis
Using the
transmitter menu
the following
modes can be
adjusted
(see page 11):
Pitch-axis
Yaw
Pitch-axis
Yaw
Pitch-axis
Yaw
Rotational
speed
Roll-
axis
Rotational
speed
Roll-
axis
Rotational
speed
Roll-
axis
