7
8
5
Fig. 7
- The illustration shows the V-tail and linkages mounted on
the fuselage.
Fig. 10
- The picture shows the parts required to fit the wings on the
fuselage.
Fig. 12
- Install the wing retaining plate and fix it to the fuselage
using the screws supplied.
Fig. 11
- Push the left-hand wing panel into the recess in the fuse-
lage, threading the servo lead through at the same time.
Slide the wing joiner through the right-hand side of the
fuselage and into the left-hand wing panel. Now fit the
right-hand wing panel onto the joiner, threading the servo
lead through the opening in the fuselage. Push the wings
together as far as they will go.
Fig. 8
- Trim the aileron servo covers to fit flush in the moulded-in
servo mounts.
10
11
12
Building and Operating Instructions - Arcus V-Tail Prop 1400
No. 2593
Fig. 9
- When the covers are a snug fit, attach them to the wings
using strips of adhesive tape (see illustration).
- Repeat stages 8 and 9 on the other wing panel.
9
