ENGLISH
18
INSTRUCTIONS AND USER MANUAL
M o d e l l s p o r t
THE FUSELAGE
09
ARF
The rods of different lengths must have a length of
approx. 690 mm and 728 mm.
10
ARF
They are fine-tuned by placing both control sur
-
faces in neutral position and the servo levers at a
90° angle in neutral position.
11
ARF
The electronic adjustment of the servos is done
during transmitter programming.
12
ARF
For the servo connection to the wing, mill a hole for
the 6-pin connector in front of the rear torsion pin.
The connector can be glued in place or installed
loosely. A fixed installation is more complex at first,
but will save you time and nerves later on when
you set up the model on the flying field.
13
ARF
To lock the wings to the fuselage, simply stick a strip
of adhesive tape to the joined parts.
14
ARF
Alternatively, the MPX Multilock System can be
installed at your own discretion. This is done directly
in front of the wing joiner.
15
ARF
Now mount the recommended drive motor on the
bulkhead, then the spinner and propeller accor-
ding to the manufacturer‘s instructions.
