j
Offset
Switch to this mode by holding down the
t
shift button
while pressing the
j
offset button.
In offset mode, you can shift the steps of your track. Select the first white
button to move the steps to the left. Select the second button to move the
steps to the right. Then press on the orange keys 1-16 and the respective
track should be shifted by one step. By repeatedly pressing, the patterns
move further steps.
k
Direction
Switch to this mode by holding down the
t
shift button
while pressing the
k
direction button.
In this mode, you can reverse the direction of your tracks. Press the orange
buttons 1-16 to reverse the track.
l
Values
Switch to this mode by holding down the
t
shift button
while pressing the
l
values button.
In this mode, you can change various parameters of each track. Use the
white keys 1-8 to select the respective parameter.
1. Length Reset
Select the first white button to set the length reset. Activating the length
reset restarts the pattern every first step of the master clock. Each of the
16 orange buttons represents a track. To toggle the length reset, select or
deselect one of them.
2. Gate
Select the second white button to set the gate type. In this setting, you can
choose to combine two or more consecutive steps into one long gate or
retrigger them at each step. Each of the 16 orange buttons represents a
track. To toggle the gate type, select or deselect one of them.
Summary of Contents for SWT16+
Page 1: ......
