5
Allow at least 100mm clearance from back and
right side when positioning the microwave.
NOTE:
Do not obstruct filter or ventilation openings.
Install away from TV and radio sets as reception
and radio interference might be affected.
Do not position Microwave near sources of heat,
water, oil or steam.
Do not stack any appliances or materials on the
top of the microwave.
Do not connect to power using an power board
or extension cord.
WARNING:
This product must be connected to
an RCD protected circuit, ensure the circuit is
properly earthed.
Before connecting the machine to the power
supply, ensure that all switches are in the OFF
position. Connect only to a RCD protected,
grounded 3-pin outlet.
Stacked installation:
Where 2 microwaves are to be stacked on top of
each other, use the mounting plate on the back of
the each machine by unscrewing them and
screwing the machines together as detailed
below;
1.
Unscrew and remove the mounting plate, and
then retighten the screws
“A”
.
2.
Remove the four screws as shown
“B”
.
3.
Use the 4 screws to fasten 2 mounting plates at
each side
“C”
.
NOTE:
Never remove the feet of the appliance or
stack more than two microwaves on top of each
other.