mp18
Page 6
INSTALLATION
Remove all the packaging materials, tape and protective plastic coating.
Place the pasta reheater on a firm, level surface in the required position. The
feet can be adjusted for an uneven surface. Take a moment to familiarise
yourself with the general arrangement of the pasta cooker before going any
further.
The element and controls are designed as a separate component to the body
and pan. This is referred to as the control box. The main switch, thermostat
and pilot lights are located on the face of the control box.
The control box can be tilted back and rested in the upright position or
removed altogether from the pasta reheater body by lifting off when in the
upright position.
Before connecting the pasta reheater to the power supply, ensure that all the
controls are in the "OFF" position.
Plug the pasta reheater into a standard, single phase, 10Amp power point.
