background image

 

 

 

 

Page: 20 

 

 

 

 

 

WARRANTY

Every care is taken to ensure that no defective equipment leaves our factory and all goods manufactured by 
us are guaranteed against defective workmanship and materials for a period of 12 months from the date of 
purchase.    Roband Australia’s  obligations pursuant  to this  express  warranty  being  limited  to the  repair  or 
replacement of the defective goods or materials, at is option and subject to the terms contained within this 
Warranty statement.  Where relevant, glass, Teflon® and lamps are 

not

 included in this warranty and RCD 

tripping due to moisture absorption by Tubular Heating Elements is not considered a warranty fault. 

Generally,  all  goods claimed  under  this  warranty  must  be returned  to  the factory  or  an  authorized  service 
agent, freight prepaid, for inspection.  All parts deemed to be defective will be replaced, however, no claims 
will be entertained for second hand products, or parts damaged in transport, misused or modified in any way 
without our approval.  For machines that are not considered to be portable (e.g. food bars, rotisseries, large 
hotplates and some bain maries), on site warranty service will be provided in capital city metropolitan areas 
only.  In all other locations, the customer is responsible for all travelling time/service call costs and payment 
for this will be required prior to the commencement of the repair.  The labour costs to actually repair the fault 
will be met by the company. 

Any repairs or replacement of defective goods or materials pursuant to this warranty, must be authorized by 
Roband  Australia  prior  to  any  action  being  taken.  The  company  reserves  the  right  to  reject  a  claim  for 
warranty if it is not completely satisfied with the circumstances under which it occurred and any other costs 
incurred for false claims or faults due to incorrect usage etc. are the responsibility of the claimant.  Roband 
Australia Pty Ltd nor any subsidiary company or Agent shall be liable for loss of profit or damage to other 
equipment  and  property  except  where  it  is  in  breach  of  the  guarantees  provided  in  accordance  with 
Schedule 2 of the Competition and Consumer Act 2010 (Cth) or the applicable legislation from time to time. 

The goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL).  You 
are  entitled  to  a  replacement  or  refund for  a  major  failure  and for  compensation for  any  other  reasonably 
forseeable loss or damage.  You are also entitled to have the goods repaired or replaced if they fail to be of 
acceptable quality and the failure does not constitute a major failure. 

Generally, authorized service agents are located in all areas which have authorized distribution dealers.  For 
the name of your nearest Australian authorised service agent, please contact: 

 

Roband Australia Pty Ltd 

1 Inman Road, Cromer, NSW 2099 

Warranty Number:  1800 268 848 

Phone: (02) 9971 1788 Fax: (02) 9971 1336 

All other countries please contact your selling Agent. 

Please complete the following details and keep this card in a safe place. 

NAME 

 

ADDRESS 

 

MODEL No: 

 

SERIAL No:                DATE PURCHASE 

 

 

NAME OF DEALER: 

 

 

 

 

 

 

PLEASE RETAIN THIS SECTION FOR YOUR RECORDS 

DO NOT POST 

ROBAND

®

 

AUSTRALIA PTY LTD 

Summary of Contents for C22

























Reviews: