Notice Items
1
Gas
Hob
1. Please make sure the source of gas is in line with that noted on nameplate before
your installation of the product, otherwise it is strictly prohibited to use.
2. The minimum distance between the gas stove and gas resource should be no
less than 1 meter and connecting tube should be the matched special gas tube,
which should be replaced once a year at a regular limitation. The regular length of
the tube should be 1-1.5 meter as preferred. It is highly required that the tube should
be avoided from pressing, heavy bending or aging. The joining point should be
carefully checked to avoid any possibility of leaking and any potential damage from
the leaking.
3. Leave the valve of the gas inflow tube under normal situation. The leaking test
should be done after any abnormal change of the valve. (Put the low-concentrated
cleaning solution to the joint point and then turn on the valve to check whether any
air bubble appears, if there were any air bubble, the valve should be turned off
immediately and fix the problem. It cannot be used until the problem is completely
solved).
4. The fixing metal joint should be installed strictly according to the operation
manual, which lays in the “package of the fixing metal joint” or installed by the
professional staff, if the tube is connected by the fixing metal joint. The test of
leaking should be done before use. (The way of leaking test above is for your
reference ).
5. The gas stove should be installed on the place of well-ventilated, but should be
avoided from the strong wind.
6. Do not try to cover the flame on the gas stove, or put anything tinder around.
Besides the gas stove cannot be used to for drying towel or clothes, etc.
7. Do not have the immediate touch on the flame-around area, such as work stand,
burner or cooktop after the use of the gas stove.
8. Do not try to beat the cooktop, and the special attention should be paid to
keeping the gas stove in good condition during the transport and installation.
WARNING: THE GAS STOVE SHOULD BE ONLY CONNECTED BY THE
QUALIFIED SPECIAL TUBE(e.g. the tube made of UV-PSA, Buna-N rubber ). IT IS
HIGHLY PROHIBITED FROM USING NORMAL RUBBER TUBE, FOR THE
POSSIBLE CHEMICAL REACTION MAY HAPPEN WHEN THE NORMAL RUBBER
TUBE MEET OZONE/LIQUID OIL, WHICH WILL POSSIBLY CAUSE THE DAMAGE
OF THE TUBE AND THE RELATED POTENTIAL ACCIDENTS.