22
9.1
T
WO
V
OLUME
–
N
O
T
ONE
–
S
TANDARD PICKUP SWITCH
The most straight forward way to customize your guitar for programmable pickup switching is to use two volume
controls; one for each pickup. This example illustrates how a guitar with two humbuckers and room for only two
potmeters can be wired (Tone control omitted). This wiring is adequate for most rock & metal guitar players that
usually have their Tone control at max anyway.
Parts list:
1 x Potmeter, 500k log w/switch
1 x Jack connector, stereo
1 x Potmeter, 500k log (keep original)
1 x Pickup switch (keep original)
Mono cable:
•
This setup allows you to use your guitar with a standard jack cable with any amp; the way you're used to!
•
Keep the “Push-pull switch” in “Pushed” position.
•
Separate volume controls for Bridge and Neck pickups.
Stereo cable:
•
Connect your guitar to the Quad 15 with a stereo jack cable.
•
Pull the “Neck volume control”.
•
Select between “Front” and “Rear” pickup with the Input selector on the Quad 15. (Pickup switch on your
guitar is now de-activated)
•
Separate volume controls for Bridge and Neck pickups.
Summary of Contents for Quad 15
Page 27: ...27...
Page 28: ...28 www roaramps com ROAR amplification Copenhagen Denmark 2021...
