Roadtrek Inc.
42
Lithium Batteries
Picture 43.1
Picture 43.2
Resetting an EcoTrek 200;
note the left bank is off
EcoTrek 400 dual controls
Each EcoTrek 200 battery has its own control. A single EcoTrek 200 will have one rocker switch at the bottom and one pushbutton switch at the top
of the panel. (Picture 43.1) An EcoTrek 400 will have two sets of switches, and so on. (Picture 43.2)
The lower rocker switch turns on the bank. In normal operation this switch should always be on. This powers the battery management system,
which manages all functions of the EcoTrek 200, including charging, voltage protection, and the battery heaters when it gets cold.
The battery management system will turn off the batteries when they are run down to near empty. The system will still accept charge but will no
longer provide power.
Turning on the Batteries
Press the lower rocker switch to turn it on. If the batteries don't come on right away (the blue indicator light does not come on) press the reset
button for about 3 seconds to power up the Battery Management System.
