DAILY LIVING
D
Do
occ N
No
o::
21906540-RSAD
R
Re
ev
v::
01
C
Co
op
py
yrriig
gh
htt ©
© H
Ha
an
nm
ma
arr M
Mo
otto
orr C
Co
orrp
po
orra
attiio
on
n 2
20
00
06
6
B
B--4
4
SLEEPING FACILITIES:
REAR TWIN BEDS
To convert the dinette into twin beds:
1.
Remove the table and leg from its receptacle and
place the table under the driver side seat cushion
and store table leg.
2.
Place both back rest cushions on the floor
vertically up against the seat base boxes or store if
desired.
3.
Pull each seat cushion 3", (8 cm) from the wall to
provide additional elbow room while sleeping.
4.
Night table can be removed, (see Picture B-P7) and
stored if desired.
To convert back to a dinette, perform these steps in
reverse order.
Picture B-P8:
Placement of the cushions for
Twin beds.
Picture B-P9:
Storage location of dinette table and
bed support for King size bed.
Picture B-P7:
Wing bolts attaching the night table,
are accessed from the sides of the night table as
illustrated above.
Wing
bolts
Dinette
table
Bed
support
