DAILY LIVING
Doc No:
21906532
Rev: 07
Copyright © Roadtrek Motorhomes Inc. 2010
B - 5
REAR KING SIZE BED, (Popular Model with Dinette)
To convert the dinette into a King size bed:
1.
Remove the table and leg from its receptacle.
2. Remove night table and store. In order to remove,
unscrew the wing nut found on each side of the
night table, (see Picture B-P7). Store wing nut in
the night tables drawer when not in use.
3.
Place table top in storage, (see Picture B-P6).
4.
Remove bed support from storage located under
bed base on driver side, (see Picture B-P9).
5.
Install bed support, Popular Model,
(see Picture B-P10).
6.
Slide both bottom cushions together so that
they meet in the middle, (see Picture BP-11).
7.
Place both back rest cushions on sides,
(see Picture B-P12).
NOTE:
The longer back rest
cushion must be placed on the driver side to
provide clearance for the bathroom door.
8.
Push down the back rest cushions so they lay
flat to create the King size bed.
9.
Install filler cushions, (see Pictures B-P12 & 13).
To convert back to a dinette, perform these steps in
reverse order.
Picture B-P10:
Placement of supports for the King
size bed, (Popular Model).
Picture B-P13:
Placement of filler cushion.
Picture B-P11:
Lay cushions flat.
Picture B-P12:
Placement of back rest cushions.
