HOWTO: Potable Water Use
91
© 2014 by Roadtrek, Inc.
You can connect to a city water connection whenever your Roadtrek is not winterized. The city water inlet connection is
located in the small compartment just in front of the driver's side rear tire.
Roadtrek recommends that you use a dedicated single purpose potable-water hose. These are usually white in color.
Buy a new one and use it only for filling your tanks and connecting to city water. View any hose lying around a
campground with extreme skepticism, especially it there's a wastewater dump nearby. Large RVs use hoses to flush
their wastewater system.
City water fill location
City water valve in closed (handle
vertical) position
Attaching pressure regulator to city
water fill location
To connect the Roadtrek's water system to an outside source:
•
• Turn the water pump off.
•
• Close the city tank fill valve by turning the handle to the vertical position.
•
• Close all interior faucets.
•
• Flush old water and any contaminants out of the water supply faucet.
•
• Connect your fresh water hose to the faucet.
•
• Attach your pressure regulator to the Roadtrek's city water connection.
•
• Attach a fresh water hose to the the pressure regulator.
•
• Slowly open the faucet of the city water source.
