Outside your Roadtrek
36
© 2014 by Roadtrek, Inc.
Start the zipper at each bottom corner by pushing the bottom stop (the metal end) of the zipper into the two back-to-back
zipper sliders, and zipping the top slider upward.
At the top, close the flap with the hook-and-loop fastener strip where the zippers meet.
Use the double slider to unzip the bottom of the screen to allow access to the underbed storage area in the back of the
Roadtrek without disturbing the top section.
To remove and stow the screen, unzip it from the top down. Unzipping it from the bottom will not allow you to remove it from
the doorframe surround.
Optional Side Door Screen
In addition to the rear door screen, there is also an optional side door screen which will allow you to keep the side door open
for ventilation without admitting insects. There is a zipper in the screen so you can enter and exit without removing the
screen.
Locate the screen in the white box that comes with your new Roadtrek, and shake it out. To orient the screen correctly, look
for the zipper in the screen - hold the screen so that the zipper goes across near the top and then down the right side. Start
the hook and loop fastener at a convenient corner and work your way around the perimeter until the screen is secured.
To enter or exit the vehicle through the side door while the screen is installed, unzip the opening and step through. While
sturdy enough to keep insects out, neither this screen nor the rear screen are designed to resist repeated and persistent
attempts by pets to get out of the vehicle. Do not leave your pets unattended with the screen in place and the door open.
