English
English
-UV REV
Press CH+ or CH- knob to enter & press V+ or V- to reverse the picture up or down
-RLREV
Press CH knob to enter & press V+ or V- to reverse the picture left or right.
TUNECONTROL
--C-SYS
To press the CH+ or CH- knob to set the C-SYS. Press V+ or V- to change the TV color
system in your countries. E.g.: PAL & PAL-M & PAL-N & NTSC358 & NTSC433 &
SECAM & SECAM--L
(Under AV mode, PAL/NTSC 358 for selection)
-S-SYS
To press CH+ or CH- knob to enter & press V+ or V- to set the Audio System in your
countries.E.g. I &D/G& M & D/K
-Channel
To press CH+ or CH- knob to enter & press V+ or V- to change the TV channel by manual.
-Auto Install
To press CH+ or CH- knob to enter & press V+ or V- to auto searching the TV channel L-
H-U in order
Note: Set the C-SYS and S-SYS before select system in your countries.
--Search
To press CH+ or CH- knob to enter & press V+ & V- to searching the TV channel
--Band
To press CH+ or CH- knob to enter & press V+& V- to set the TV Band UHF,VHF-L,VHF-H
--Fine Tune
To press CH+ or CH- knob to enter and press V+ & V- one by one to fine tune the signal
of the TV channel
--Skip
To press CH + or CH-knob to enter & press V+& V- to select skip ON by the TV
channel through the CH+/CH- knob on the remote control if you want. To
select skip off to release or press the number on the remote control directly
to display.
-PG Exchange
To press CH+ or CH- knob to enter & display:
Press CH knob to select the row & press V knob to select the channel number. E.g. To
change the frequency signal of channel 8 to the frequency signal of channel 3 as above.
Press V knob to confirm and press menu to release
TIMECONTROL
--Clock
e.g. 02:12(Display the operating time)
Press CH+ or CH- knob to enter & press the number knob on the remote control
to set the time. e.g.19:20 to enter 1920.
--OFF
e.g. --:-- (To set the time for auto-off)
Press the number knob on the remote to set the auto-off time.
--ON
e.g. --:-- (To set the time for auto-on)
Press the number knob on the remote to set the auto-on time.
--ON
Channel e.g.--:--(To set on the channel when switch on)
Press the number knob on the remote to select the channel that you desired when
switch on.
Press MENU to quit after finished.
ACCESSORIES
- Remote control
- AC/DC Adapter
- Car Adapter
- A/V RCA Cable
- 3.5 mm 75 Ohm Adaptor cable
IMPORTANT SAFEGUARDS
Avoid places with excessive humidity or near water or touching the TV set with wet hands.
Avoid places with extremely high or low temperatures, dust, or subject to excessive
sunlight, in a vehicle also. Avoid applying strong shocks to the set.
Do not use any chemical solvent (alcohol, benzine, thinner, etc.) for cleaning the TV set.
Do not disassemble or alter the TV set.
5
6
Channel
PG Exchange
3
0(e.g. Press V knob to enternumber 8)
