English
English
3
4
REMOTECONTROL
1.
Stand By Button
2.
Mute Mode
3.
AV Switch
4.
Number Selector(0~9)
5.
Volume Down Control
6.
Channel Up Control
7.
Enter Button
8.
Volume Up Control
9.
Channel Down Control
10.
Auto Search
11.
Single/Two/Three Digits Selector
Battery Installation:
1. Open the Battery drawer by pulling it out.
2. Insert a CR-2025 battery in the Battery drawer.
3. Close the Battery drawer.
Operation:
Aim the Remote Control to the Remote Sensor (2) on the unit.
Maximum operation Range: 5 m.
POWER SUPPLY
Mains operation with PowerAdapter
For use with 230V AC house current, plug the AC/DC cable of the Power Adaptor
(supplied) to the 12V IN jack (14) and the Power Adaptor to a 230V AC wall outlet.
Press the Main Power switch (3) to ON.
Car battery operation
The car cigarette lighter adapter cable (supplied) is useable with this unit for direct use in
any 12V negative ground vehicle. Simply insert the small plug of the cable into the
matching DC jack (14) on the side of the unit and the other end into the cigarette lighter of
the vehicle. The unit can operate between 11 and 15 V DC.
INSTALLING & OPERATING INSTRUCTION
1. Plug the power cord of the AC/DC adapter (included) one end to the DC 12V IN (14)
on the unit and the other end to the 230V outlet.
2. Press the POWER button on the unit (3) unit or on the remote control (1).
3
Pull out the ROD ANTENNA (16) easily and adjust the angle / heading to the best
position to receive TV signals.
4. To turn Off the unit, press the POWER SWITCH (3).
VOLUMEADJUSTMENT
The Volume can be adjusted directly by pressing the [ VOL
]
and [VOL
] Buttons (6,7)
on the unit or [VOL +/- ] Buttons on the remote control (5,8).
MENU OPERATION
VIDEOCONTROL
To press CH knob to enter.
To press select V+ or V- to the 0-100 unit as desired.
-Brightness
To adjust the picture if it s too bright or dark.
-Contrast
To adjust the picture if it s too bright or dark.
-Color
To adjust the color density.
-Sharpness
To adjust the picture to clear.
-Tint
To adjust the best color under N system signal.
SETUP CONTROL
-Language
Press CH+ or CH- knob to enter & Press V+ or V-to select language in English (Eng)
/Deutsch (DEU)/Spanish(ESP)/Italian(ITA) /French(FRAN)L/Portuguese(PORT).
-Background
Press CH+ or CH- knob to enter & Press V+ or V-to set ON/OFF, it will becoming
blue screen when no signal.
-Mode
Press CH+ or CH- knob to select the MODE , Keep pressing knob to select
NORMAL (4 : 3) or Wide(16:9)
