5
English
DAB RADIO SETTING
During DAB radio mode, press and hold the menu button , lcd will show
“
full scan
”,
then press
[SKIP
-
/+]
(11/10) repeatedly to select below:
Full scan
: press
[SCAN]
button (8) to confirm, unit will automatically scan those
available dab stations.
Manual tune
: press select button to confirm, then press pressing
[SKIP
-
/+]
button
(11 / 10) to select dab radio frequency manually, press select button again to confirm
if desired frequency is found.
Press and hold
[MENU/MODE]
(15) button, you can choose with
[SKIP
-
/+]
(10/11)
buttons and confirm your selection with
[SELECT]
(9) button:
Full scan
: unit will automatically scan those available dab stations.
Manual tune
: , then press pressing
[SKIP
-
/+]
(10/11) buttons to select dab radio fre-
quency manually, press
[SELECT]
(9) button again to confirm if desired frequency is
found.
DRC
: Press
[SKIP
-
/+]
(10/11) buttons repeatedly to select
“
off
”, “
low
”
and
“
hgih
”,
then
press
[SELECT]
(9) button to confirm. the selected option will show
“
＊
”
at the right
side of lcd.
PRUNE
: Press
[SKIP
-
/+]
(10/11) buttons repeatedly to select
“
yes
”
and
“
no
”,
press
[SELECT]
(9) button to confirm. this is used to cancel all invalid stations after full
scan.
CD
-
MP3 OPERATION
1.
Select
“
CD
”
mode by pressing the
[MODE]
button (2) repeatedly;
2.
Press
[OPEN/CLOSE]
(7) to open the
[CD DOOR]
(6) and place a CD with the
label up in the CD compartment.
3.
Close the
[CD DOOR]
(6). Focus search is performed and playback will start au-
tomatically from the first track.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
1.
Stop the playback by pressing
[STOP]
(9);
2.
Press
[MEM/MODE]
(16), the display will show the number of the track
on the left side and the number of program on the right side.
3.
Select desired track by using
[SKIP
-
/+]
buttons (10/11);
4.
Press
[MEM/MODE]
(16) to confirm desired track into the program
memory;
5.
Repeat step 3 and 4 to enter additional tracks into the program memory.
6.
When all the desired tracks have been programmed, press
[PLAY]
(8) to play the
disc in the order you have programmed.
Note:
Press
[STOP]
(9) twice to terminate programmed play.
TAPE OPERATION
1.
Select
“
TAPE
”
mode by pressing the
[FUNCTION]
button (2) repeatedly;
2.
Press
[EJECT]
(23) to open the
[CASSETTE SLOT]
(18) and insert your tape;
3.
Close the
[CASSETTE SLOT]
(18);
4.
Press
[PLAY]
(20) to start playing tape.
•
Press
[PAUSE]
(24) when you want to stop playing tape operation temporarily,
press again to resume tape operation.
