7
English
DIRECT USB ENCODING
Remark:
•
Recording speed is 1:1.
•
No song title will be recorded during encoding mode.
•
To avoid damage to USB memory, remove it only when the radio is turned off.
ENCODE FROM FM, DAB, TURNTABLE, TAPE, BLUETOOTH AND AUX:
1.
Plug the USB stick into the
[USB PORT]
(3);
2.
Perform normal playback of the source you want to encode & record;
3.
Press the
[RECORD]
button (14) to start encoding. The display will show
“
REC
”;
4.
Once the record is finished, press the
[STOP]
button (9) to stop recording.
ENCODE FROM CD:
1.
Plug the USB stick into the
[USB PORT]
(3);
2.
Perform normal playback of the CD you want to encode & record;
3.
After focus search is completed, press the
[RECORD]
button (14);
4.
Press repeatedly the
[SKIP
-
/+]
button (10/11) to select the desired encoding op-
tion:
•
REC
-
ONE: Select to record only the current track;
•
REC
-
DIRECTORY: Select to record the whole folder;
•
REC
-
ALL: Select to record all the tracks of the CD.
5.
Press the
[RECORD]
button (14) to confirm;
6.
The playback will stop and restart automatically and on the display
“
REC
”
will
flash. Encoding is performing now;
7.
Press the
[STOP]
button (9) to finish recording.
Note:
After completing of encoding, unit will stop playback and encoding automatical-
ly.
DELETE TRACKS FROM USB
1.
Perform normal playback of the track you want to delete;
2.
During playback of the track you want to delete, press and hold
[DELETE]
(14).
3.
Press repeatedly the
[SKIP
-
/+]
button (10/11) to select the desired encoding op-
tion:
•
DEL
-
ONE: Select to record only the current track;
•
DEL
-
DIRECTORY: Select to record the whole folder;
•
DEL
-
ALL: Select to record all the tracks of the CD.
4.
Press the
[DELETE]
button (14) to confirm.
SYSTEM SETTINGS
Long press
[MENU] (15)
button, select desired menu with
[SKIP
-
/+]
button (10/11)
and confirm with [
SELECT
] (9) button.
Alarm
: setting alarm function.
Time
: setting time
Backlight
: Set the time of full display time and the brightness level .
Language
: Set a different language
Factory reset:
Restore to factory settings.
Software Upgrade
: not in use
SW version
: shows the current software version
