RoadScan Canada DH22, User Instruction Manual

Page: 17 / 20

DISCLAIMER
Please make sure that you are following the regulations and laws set by your Provinces DMV (Department of
Motor Vehicles) prior to mounting your camera for vehicular use. This manual is not designed to provide any
specific legal advice.
• Please check the DH22’s features periodically to ensure that it is operating as required.
• Please use the DH22 as a tool while driving and use driver’s safety while driving.
• RoadScan Canada Inc shall not be held responsible for any traffic violations related to the positioning or
improper use of our product.
• Avoid mounting the camera outside of an airbag deployment zone.
• Knowing most vehicles run off 12VDC power supply from the battery, please double check our cigarette
power adapter’s output rating before attempting to run power directly from the car battery. If the 12 volt is
cut and then hardwired to a vehicle, the warranty is null and void. To charge in the vehicle, ONLY use 12 volt
provided.
​
Page 15
IMPORTANT
This guide provides important information on the use and operation of your DH22 and the images/features
shown throughout the manual are subject to change without notice due to system and firmware upgrades.
Please read all the information carefully prior to using the product for the best performance and to prevent
any damage/ injuries or misuse of the device(s). Customers are encouraged to have read through this complete
user’s manual before using the DH22. Any unapproved changes or modifications will void your warranty.
Please ensure having a complete understanding of the following conditions and restrictions.
NOTE: Please check your Provincial Motor Vehicle Act and Regulations pertaining to the use of this camera
while operating your vehicle. It is illegal in most areas to operate a camera while driving.
CONDITIONS
Please read the following messages to make sure your working environment is suitable if the camera is
intended for use in the vehicle.
• If your vehicle does not cut off power to your cigarette lighter port, then you may
have to manually turn off or unplug the charger to prevent it from overheating.
• The temperature should be kept between –10˚C and 50˚C (14˚F to 122˚F).
• Avoid putting the product in places where temperature or humidity may change
rapidly.
• Keep it dry, dustless and avoid lens exposure in direct sunlight.
• Keep product away from heat sources such as electric heaters.
• Do not use the camera near harmful chemicals.
• Do not place product near any strong magnetic objects