5.3.5 Motion and static mode
Configuration
SMS Command
Set motion and
static mode 1
MODE,6,T1,T2,A#
or
MS, T1,T2[,A]#
For example:
MODE,6,60,300,1#
Indicates
upload interval in motion
status is 60 minutes, upload
interval in static status is 300
minutes, motion alarm on
T1:Upload interval in motion status , value
5-43200 minutes
T2: Upload interval in static status, value
5-43200 minutes or set clock mode, format
(HH:MM)
A:Motion Alarm on, 0:Motion Alarm off
Set motion and
static mode 2
（
Optional
）
MODE,8,T1,T2,A,B#
For example:
MODE,8,2,1440,0,1#
Indicates upload interval in
motion status is 2 minutes,
upload interval in static status
is 1440 minutes, motion alarm
on, after motion always keep
tracking
by
interval
2
minutes,only exist command
MODE,0#
can stop the tracking
T1: The return interval for entering the
tracking mode during exercise, the value
range is 1-5 minutes
T2: Return interval at rest (value range
5-43200 minutes) or alarm clock (format
HH:MM)
A: 1-Quit tracking at static, 0-continuous
tracking
B: 1- turn on the vibration alarm, 0- turn off
the vibration alarm
You can exit the tracking mode by command;
B=1 and the device is awakened by vibration,
and the vibration alarm will be reported after
going online;
Note:
Device can’t be wake up by vibration while in motion mode
Device can be wake up by vibration while in static mode
After wake up, there should be 3 seconds vibration in 6 seconds, device will turn on cellular
module and upload position data, otherwise it would enter into sleep mode again and maintain
the previous configuration parameters
5.4
【
Common SMS command list
】
HX,<T>#
Upload Interval in Sleep Mode
default: 1440 minutes ,as 24hours
T
：
wake up time
，
unit: minutes
value range :5-43200 minutes
