INSTALLING YOUR vmax361
LET’S GET STARTED!
• 3 •
ROADMAX vmax361
Owner’s Manual v1.1
DO NOT install your vmax361 on or in
deployment zone of your vehicle’s airbag units.
!
3. Fit bottom of vmax361 unit into
lip of holder.
4. Push top of unit into holder until
locking tab “snaps” into place.
7. Adjust the viewing angle of your
vmax361 system, and you’re
ready to power up!
A Windshield Mount. B Dashboard Mount.
(Use dust-free cloth to clean mounting surface.)
1. Installing the unit suction mount:
5. Flip out rear GPS antenna.
6. Plug 12v Power adapter to both
the Unit and Lighter outlet of your
vehicle. Red LEDs on both your
vmax361 and lighter plugin show
that your unit is properly
connected and charging.
Push suction
lever
Push suction
lever down
Mounting disc
2. Install the unit cradle holder onto
the suction mount.
Push in and slide down.
Windshield Mount*
Dashboard Mount
*(Antenna angle should be horizontal to sky)
(Plug into
bottom of unit.)
B
A
Adjust viewing angle using
both hands to prevent unit
from dislodging.
om - roadmax vmax361 - 5x5 version.qxp 9/25/2006 3:32 PM Page 3
