4
User Guide
Notice
A. When your hands have sweat, water.
B. When your hands have dirt.
Do not touch the monitor to avoid it was damaged and cause the
operating can t control.
'
Car back video input function
This unit includes car back video input function. (When car back camera
connects this player), during the operation of car backing, this player
changes from play mode to car back video input mode automatically.
Then the screen shows you back view, it protects you more safely.
Note:Maybe some camera lens can t match with this monitor,so it will app
ear horizontal line on picture.Only need press
9P/N
button over 2
seconds on remote control to set system match in 3 seconds,then
solve this question.
'
RESET MPU
Press RESET button to reset MPU to
default MPU must reset as following
situation:
When finished the installation before
use this unit first.
If this unit can t operate normally.
When the monitor appears
exceptionally or the error message.
'
'
'
1. Turn off the Ignition switch.
2. Use the pen point or other edgily tools to press.
37
Troubleshooting
Common Trouble
33
Trouble
Reason
Measure
The power
fails to put
through the
unit does not
work
The down-lead and tie-in
has
connected.
dis
Please check whether the power
has been connected correctly.
Fuse broke off.
Removes reason which the fuse
broke off, then chang the fuse.
For god's sake to install the right
same tating fuse.
Press 'RESET' button.
The noise and other factor
caused the Built-in MPU
fails to work normally.
No sound
The wire has discconnected. Connect the wire correctly.
The unit enforcing the play
with repose, slow motion or
per frame to play.
Enforce the repose, slow motion
or per frame to play has no
sound.
No picture
The grip brake wire has
disconnected.
Connect the grip brak wrie, then
pull it up.
The grip brake has not
pulled up.
Connect the grip brak wrie, then
pull it up.
Icon
display,
the operation
is unable to
carry on
The disc forbid operating.
The operation is unable to cany
on.
The operation is unable to cany
on.
This operation's structure
with the disc do not
compatible.
Audio and
video leap
The unit installed loose.
Fix the unit steadily.
Touch screen
can t operate
normally by
tiuching
'
Built-in MPU is unable to
normal work.
After launder the operations
normally.
Radio signal too low to store the
correct frequenly into the
storage.
The remote
control does
not work
The remote control does
not aim at its receiver
window.
The battery of remote
control die down.
The remote control aimed its
window.
receive
Please use new battery instead.
Fail to reset
tune in radio
mode.
