1.In working state, press this button to enter GPS&audio/vedio synchro
1
GPS&audio: In audio/radio/TV mode, press GPS button on panel/
remote control to enter GPS interface with the above mentioned mode.
When there is voice coming from the GPS, the current voice will be
covered by it. After the GPS finishing guiding, it will come back to the
previous mode. The GPS interface stays.
GPS&Audio/Video Synchro
In standby state, press
or MUTE on remote control to turn on/off the
mute mode.
Mute Button
2
GPS&video: In audio/radio/TV mode, press GPS button twice on panel
/remote control to enter GPS mode. When the GPS finishes voice
guiding,it come back to the previous mode.
Note: If the above mentioned modes are not needed, turn it off in the
GPS mode.
When the disc is inserted into the slot, in DVD mode, the disc will be played
automatically.
The disc will not play if not in DVD mode.
Disc Slot
12
Key-press Instructions
4
In disc playing mode, press this button over 2 seconds to select fast-
forward as following: fast forward X2, X4, X8 ,X16 playing.
5
In bluetooth mode ,press this button on remote control to hangup.
3
In TV mode, press
button once to skip previous a channel, press
this button over 2 seconds to search up automatically and play the
searching stations.
1
In radio mode, Press
on panel/remote control to adjust the
receiver frequency up. Press and hold it for over 2 seconds to search
up automatically.
2
In disc playing mode, Press
to select the next track.
Radio Searching up/DVD/Next Track/TV Channel Search
Backward/ Fast-forward(
)
(The optional function operation)
(The optional function operation)
Matching & Connecting
1
CXN1450
0000
2
In
touch
or
button to connect. If out
of connection, pressthis button to connect again.
3
Auto-answer. In connected state, the calls will be
connected automaticallyafter ringing 3 times.
4
Press
button, then
is unavailable.
button is available only when BT is conected.
5
Not available.
CONNECT
ANSWER
BT
A2DP
Please build up bluetooth connection between the unit and the cell
phone before using the bluetooth function. Touch
and turn
on the bluetooth function in the cellphone to search for device. When
the system attains the signal, the name of the device will be shown on
the cellphone. When
is connected,press password
to match with the device. When 'CONNECTED' is shown on the
cellphone, the unit has been connected with the cellphone successfully.
3
Touch
to enter bluetooth calling interface. Pic6-2
Pic6-2
29
Touch Screen Operations
(Pic6-1)
