KIT# 524448-4
12/5/18
KS
BASEPLATE KIT
INSTALLATION INSTRUCTIONS
ROADMASTER, Inc. 6110 NE 127th Ave. Vancouver, WA 98682 360-896-0407 fax 360-735-9300 www.roadmasterinc.com
Fig.R
Fig.X
17. Tighten all bolts to the bolt torque requirements found at the end of these instructions.
Note:
use Loctite® Red on all
nuts and bolts.
18. Reinstall the fascia, reversing steps 1 through 6.
19.
Note: the following four images are for illustration purposes only, as your specific application may be slightly
different.
The spring-loaded pin on the removable arm snaps into a notch on the receiver, locking the removable arm into its
final towing position. Before inserting each arm into the receiver, verify that the spring is working by ensuring that the
spring-loaded pin moves easily back and forth within the barrel when pulled and that it can be pulled flush with the face of
the barrel (Fig.V and Fig.W).
20. On each side, insert the removable front bracket arm into the front receiver 90 degrees from its final towing position,
depressing the spring-loaded pin against the receiver (Fig.X). Now, twist back 90 degrees until the spring-loaded pin
snaps into place in the notch on the receiver, locking the arm into place in its final towing position (Fig.Y).
Please note: it is the owner's responsibility to ensure the locking of the pins before towing. Otherwise, failure
of the towing system will result.
21. Install the tow bar to the mounting bracket according to the manufacturer's instructions.
Fig.R
Fig.V
Fig.R
Fig.W
Fig.Y
pin flush
with barrel
pin depressed
against receiver
pin locked
into notch
All illustrations and specifications contained herein are based on the latest information available at the time of publication approval.
ROADMASTER, INC. reserves the right to make changes at any time without notice in material, specification and models or to discontinue models.
Summary of Contents for BASEPLATE KIT
Page 9: ...KIT 524448 4 12 5 18 KS...
