5
Figure 2
ASSEMBLY INSTRUCTIONS — NARROW AXLE
continued from preceding page
It is imperative that all five of the ½" x 4½" bolts
are used (on each side) to secure the axle to the
main bed. All five holes will line up if the axles and
ramps are in the correct position. Failure to install
and secure all bolts as instructed may cause the axle
to separate from the main bed, resulting in property
damage, personal injury or even death.
5
B
Secure the ramp and axle on the other side — Re-
peat Steps 2B - 4B to secure the ramp and axle on the
other side.
You must install the ramp, axle and tie rod on the
other side at the same width position as you did for the
first side.
To finish the installation,
go to Step 6 on page 6.
