7
READ THIS ENTIRE MANUAL AS
WELL AS THE DECALS ON THE
ATTACHMENT BEFORE ATTEMPT-
ING ANY MAINTENANCE, SERVICE
OR SETUP OF THE UNIT.
SETUP
Although the Roadhog Inc is supplied
fully assembled, some simple checks
should be performed before operation
begins.
Safety Decals
The safety decals existing on the attach-
ment should be clearly readable and al-
ways followed. The locations and de-
scriptions of the decals are shown in the
“Safety Decals”
section.
Hydraulic Couplers
The planer has been shipped
without
the 2 required hydraulic quick couplers.
Obtain correct brand and size and install
them on the hoses.
The CP12LF and CP16LF are Low Flow
Cold Planers which operates on the aux-
iliary flow of the skid loader. Since the
auxiliary flow is reversible, be sure to op-
erate the unit so the drum is spinning in
the correct direction. The drum should
spin in the direction the teeth are point-
ing.
Hoses / Fittings
Hydraulic fittings are used to connect
all attachment hoses. All fittings should
be tight and free of hydraulic leaks.
Hoses must be free of crimps or cuts
that might result in leakage. Check
your attachment before operation to
make sure all hose routings are kink-
free and allow for maximum movement
of all extend, lift/lower, and/or swing
motion required during normal opera-
tion.
Drum Assembly
For proper operation, picks must be
installed in every holder on the drum.
WARNING
