Page 6 of 11
RA8100 v1.0 EN 07.20
Connection
s:
Power cable.
Red
Cable
*
: Connect to the switched positive on the reversing
lamp. This cable should only be live when the ignition is On and
the vehicle is in reverse gear
Black Cable:
Connect to the metal body of the vehicle.
White
and
Green loops
.
Green - Cut
the loop to add
parking
line guides to
the image.
White -
Join
the
loop
to reverse the image (
mirror
)
RCA Cable (yellow):
Connect to the
Video-in
of the monitor or head
unit.
Red wire
*
- If you
need
to manually control the camera via a switch
at
the front
of the vehicle, rather than engaging reverse gear
. C
onnect the Red wire (on the
RCA cable) to the Red wire on the
camera
power cable
and opposite end to the
switch.
The switch should then be connected to
a fused
positive
supply
( a
switch not included in the kit) .
Troubleshooting:
Image is not displayed on the monitor or head unit:
Check the video cable connections.
Check the camera has power when the vehicle is in reverse gear, with
the ignition on.
Check the configuration/settings of the head unit.
The i
mage is not clear:
Is the camera lens dirt or scratched?
The image is inverted:
Check the camera orientation.
