4
OPERATIONS INSTRUCTIONS
1. Ensure that the working voltage matches your power supply prior to use.
2. Plug the mains lead in to a power outlet and flip the power switch.
3. Adjust the Fume Absorber angle depending on the distance you desire by
loosening the knob on both sides of the housing and then tilt to the desire
location.
Re-tighten once you find the desired angle ensuring that you do not over tighten.
INSTALLING & REPLACING THE CARBON FILER
Remove the plastic bag from the filter and place filter into the opening.
Replacing the old activated filters follows much the same procedure. Under
normal operating conditions the filters should be replaced once a month or when
excessive dust has obviously adhered to or discolored the filter. Failure to regularly
change the filter will directly affect the absorption capacity and effectiveness of
the Fume Absorber.
Figure
Summary of Contents for RND 560-00156
