• TESTING CONTINUITY USING TONE (SWITCH TO “TONE”):
(CAUTION: DO NOT CONNECT TO AN ACTIVE AC CIRCUIT EXCEEDING 24V
IN THIS MODE.)
1. Connect the test leads to the subject pair.
2. Use a handset or headset at the remote end and touch the wire end(s) with the
clip leads(s)
3. Reception of tone is an indication of continuity
• MODULAR TESTING:
1. All above tests are available through the modular plug for line 1 only - red and
green wires.
• COAX TESTING:
1.
To test unterminated coax, connect red to outer shield and black to center
conductor or red to outer shield and black to ground.
2. To test terminated coax, connect red to connector housing and black to center
pin or red to connector housing and black to ground.
• MAINTENANCE
BATTERY REPLACEMENT INSTRUCTIONS:
1. Seperate the case, install a fresh 9V battery and reassemble.
DO NOT OVERTIGHTEN.
2. Warranty limited solely to repair or replacement; no warranty of
merchantability, fitness for a particular purpose or consequential
damages.
-4-
